Advertisement
Mom's frame
John's frame
1. Click on the Facebook icon and log in to your facebook account
Mom's frame
John's frame
Mom's frame
John's frame
2. All your folders and timeline photos will be shown in the App. To send photos to your frame, click on the frame to send photos to and then select the photos to
send, and then press the "Send Photos" button
3. To return to the home page, click on the home icon.
1. Click the setting icon then
select edit frame
1. Click the setting icon then
select edit frame
1. To remove a friend's permission to send
photos to your frame, go to
"Settings-Manage User"
B. Sending photos from Facebook
Frame & Friends' management
A. Edit Your Frame's Name
null@simplysmartframe.com
Frame Email
2. Select the frame you want
to edit, click on "Name"
B. Removing a Frame
Frame Email
null@simplysmartframe.com
2. Select the frame you want
to remove, and press Remove
Frame
C. Revoking a permission to send photos
2. Select the friend you want to remove.
3. Name your frame and press
"OK"
Note: If you have only one frame (The
Master Frame) You will not be able to
delete that frame.
To remove the Master Frame, you will
have to use the factory reset function in
the setting's menu
3. Select "Delete User & Photos" to remove
your friend. Your friend will no longer be able
to send photos to your frame
04
Frame Email
null@simplysmartframe.com
4. Frame name is changed
successfully
05
Advertisement
Need help?
Do you have a question about the PhotoShare Frame and is the answer not in the manual?
Questions and answers
How to remove single photo mode
how to set clock?
To set the clock on a SimplySmart PhotoShare Frame, follow these steps:
1. Plug the AC adapter into the back of the frame and then into an outlet. The frame will power on automatically.
2. Select your timezone when prompted.
3. Tap “Next” to continue setup.
The clock is set automatically based on the selected timezone during setup.
This answer is automatically generated
How to control volume
Setting auto off and on feature
How to change location setting
To change location settings on the SimplySmart PhotoShare Frame, follow these steps:
1. Plug the AC adapter into the back of the frame.
2. Plug the adapter into a power outlet to turn the frame on.
3. When prompted, choose your timezone.
These steps are part of the initial setup, and the timezone setting determines the frame’s location setting.
This answer is automatically generated
I have enjoyed my Photo Frame for the past four years. Now the Frame will not except my photos. After I send a picture, it says "Sending images," then "sent successfully". But the pictures do not appear on my Frame. Help
Your SimplySmart Home PhotoShare Frame may not display the photos you send for the following reasons:
1. Request Not Approved: If you are not the frame owner, your request to send photos must be approved first. Until approved, photos will not be displayed.
2. Frame Owner Hasn't Approved You Yet: The frame will only show photos after the frame owner approves your request. The frame turns black when approval is given.
3. Wrong Frame Selected: If using the app, make sure you selected the correct frame before sending photos.
4. Email Method Not Set Up Correctly: If sending by email, ensure you're using the correct frame email and properly attaching the photos.
5. Permission Revoked: If the frame owner has removed your permission, your photos will not be accepted or displayed.
6. Connection or Update Issue: Ensure the frame is connected to Wi-Fi and fully updated. A pending firmware update may prevent normal operation.
This answer is automatically generated
bottom left corner of frame shows "safe mode", what is that, is that why I can't get pictures and how do I turn it off?