Subscribe to Our Youtube Channel
Related Manuals for Rosenbauer HEROS-titan AS
Summary of Contents for Rosenbauer HEROS-titan AS
- Page 1 Protective helmet for structural fire fighting certified to AS/NZS 4067:2012 + A1:2014. HEROS-titan AS User Information (EN)
- Page 2 Rosenbauer – HEROS-titan AS User information...
- Page 3 The product warranties by the manufacturer are voided if the helmet is not used and maintained according to this manual. Only end users shall separate this manual from the helmet. If any information is unclear, contact Rosenbauer International or visit our website at www.rosenbauer.com...
- Page 4 Rosenbauer – HEROS-titan AS Manufacturer's and customer service address Rosenbauer International AG A-4060 Leonding, Paschinger Str. 90, Austria Tel.: +43 732 6794-0 Fax: +43 732 6794 -77 service@rosenbauer.com www.rosenbauer.com Manufactured in Austria. 1. SAFETY CONSIDERATIONS / LIMITATIONS OF USE DANGER / WARNING IF SUBJECTED TO SEVERE IMPACT OR DETERIORATION, THE HELMET IS TO BE RETURNED TO MANUFACTURER FOR INSPECTION, OR BE REPLACED.
- Page 5 HEROS-titan AS – Rosenbauer This helmet is designed to provide LIMITED protection to the head when worn during structural fi re fi ghting and technical rescue activities but will NOT protect you from all burns, injuries or hazards. Avoid exposure to fl ashover, collapses, falls and other conditions that may exceed the protective capacity of this helmet.
- Page 6 All repair work, component exchange and servicing on this helmet may only be undertaken according to the appropriate guidelines pursuant to these instructions for use. All activities must be logged. Only specialists authorized by ROSENBAUER, may carry out fundamental maintenance and servicing work, not described in this user information.
- Page 7 HEROS-titan AS – Rosenbauer added or alterations made to the helmet except those recommended by the helmet manufacturer. During operations in areas subject to the danger of explosions, the breathing apparatus mask and the helmet should be treated with anti-static spray, or a water fi...
- Page 8 Rosenbauer – HEROS-titan AS The visors must be stowed in the full upright position when a SCBA facepiece is worn. The trapezoidal shaped chinstrap is made of flame-retardant, highly heat-resistant material. In combination with the integrated padding, the chinstrap ensures pleasant wearing.
- Page 9 HEROS-titan AS – Rosenbauer 2.2 Additional adjustment possibilities 2.2.1 Center of gravity To optimize the individual weight balance the helmet shell can be moved against the inner harness to be fixed in three different positions. To do so, open the main screws left and right as shown.
- Page 10 Rosenbauer – HEROS-titan AS 2.2.3 Adjustment of the wearing height The wearing height is easiest to adjust when the interior fittings are removed. Remove both front fi xing points left and right Remove both rear fi xing points left and right...
- Page 11 HEROS-titan AS – Rosenbauer IMPORTANT: Protection of the visor is only provided in the final position (end locking, no intermediate position). IMPORTANT: The eye protector (optional) should be moved only by using both levers (left and right) smoothly. Otherwise the visors can be scratch-damaged.
- Page 12 Rosenbauer – HEROS-titan AS ∙ The fabric head band covers can easily be removed from the headband and can be washed in a washing machine at low temperature (use a mild detergent only). Dry all materials completely before reassembling and before use.
- Page 13 HEROS-titan AS – Rosenbauer Reflective Trim Replace if damaged, nonreflective or missing Chinstrap – Replace if any of the following conditions are evident Frayed, missing, or broken parts Frayed, cut or broken stitching Worn-out hook and loop parts Broken, worn-out or missing release buckle...
-
Page 14: Maintenance
Rosenbauer – HEROS-titan AS 3. MAINTENANCE Take extreme care that at all time as well as after replacement of elements all fixing parts, screws, sliders etc. must be securely locked again and adjusted properly to ensure the safety function of all elements. -
Page 15: Transport And Packaging
Repair or replacement for breach of this warranty shall be the exclusive remedy available. Under NO circumstances Rosenbauer International AG will be liable for economic, in- cidental or consequential damages or losses caused by reason of the non-operation of this protective helmet. - Page 16 Text and illustrations are not binding. The illustrations Tel.: +43 732 6794-0 may show optional extras only available at extra charge. Fax: +43 732 6794 -77 Rosenbauer retains the right to alter specifications and office@rosenbauer.com dimensions given here in without prior notice. www.rosenbauer.com...
Need help?
Do you have a question about the HEROS-titan AS and is the answer not in the manual?
Questions and answers