Accessories And Spare Parts List Removable Insulation Jacket; Filters; No2 Testing Kit; Fitting Kit - Envirovent NitroBox NO2 Installation Manual

Accessories and Spare Parts List
Removable Insulation Jacket
EnviroVent can provided a custom designed
removable insulation jacket for the NitroBox
NO2 Filter which will provide 30mm of insulation
material with thermal conductivity of 0.04W/
(m.K). This jacket needs to be wrapped around
the unit before mounting to a wall or ceiling. The
unit must be offset from the wall or ceiling by
a minimum of 30mm for space required for the
insulation material. The method of offsetting
the unit must be able to support the weight of
the unit. The insulation jacket can be opened by
means of hook and loop fasteners on flaps at
the front and this will give access to the filters
for inspection and replacement.
Model Part Number
EV-FILTB1-NO2
EV-FILTB2-NO2

NO2 Testing Kit

A NO2 testing kit is available from EnviroVent
that can be used to determine the levels of NO2
within the property.
NO2 Testing Kit
KIT-TEST-NO2
11
NitroBox NO2 Filter
Removable
Insulation Jacket
EV-FILTBJ-NO2
EV-FILTBJ-NO2
Exposure Time
8 to 72 Hours

Filters

Model Part G4 Pre-
Number Filter
EV-FILTB1- FILTER-G4-
NO2 FILTB
EV-FILTB2- FILTER-G4-
NO2 FILTB

Fitting Kit

Model Part Number
ALL MODELS
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING
0345 27 27 810
THIS UNIT, CALL US ON:
Active
F7 Pre-
Carbon
Filter
Filter
FILTER-F7- FILTER-C-
FILTB FILTB1
FILTER-F7- FILTER-C-
FILTB FILTB2
Ducting Behind Unit
Mounting Kit
EV-FILTBM-NO2