Step 7: Connect the RJ-45 to the female connecter located directly inside the enclosure, make sure the
connection is locked in place before tightening the gland.
Step 8: Tighten the gland to the enclosure and than tighten the compression nut around the Ethernet
cable
Step 9: Mount the outdoor units to the predetermined CPE location you chose in step 1
3.2 Mounting External CPE Antenna
To meet regulatory restrictions, RapidWaves' external antenna configuration and any external antenna
NOTICE
must be professional installed.
RapidLink 54 Wireless Point-to-Multipoint Networks
8
Installation Guide