Basic Cpe/User Radio Configuration; Overview Of The Rapidlink 54 Web Interface; Setting Basic Network Parameters - RapidWave RapidLink 54 User Installation Manual/Users Manual

Section 4: Basic CPE/User Radio Configuration
4.1 Overview of the RapidLink 54 PtMP CPE Web Interface
All basic radio configuration management parameters are accessible through an embedded web server interface
called the Wireless Link Manager (WLM). Using a web browser, you can easily log into the web server of your wireless
unit. From this user-friendly interface, you can communicate with any RapidLink 54 CPE and perform configuration,
management and trouble-shooting tasks for this local radio.
4.2 Setting Basic CPE Radio Parameters
In this section, you will log into the RapidLink 54 WLM for the first time and modify your radios default settings.
NOTICE You may need to change your computers TCP/IP local area connection setting to an IP
range that is compatible with the default IP of the CPE
Step 1: Load your Web browser.
Step 2: Type the factory default IP address: 192.168.1.55 into the address field of your browser and press Enter. This
will load the RapidLink 54 WLM.
Step 3: Enter the default (Case Sensitive) Login: admin and Password: rl54 when prompted and click Enter.
Tip It is strongly recommended that you change the Password and Login as soon as you have
completed the basic configuration by clicking on the Security tab. See section 5.3 under Security for
full details on changing password.
RapidLink 54 Wireless Point-to-Multipoint Networks
13 Installation Guide