Denon DVD-5910CI Service Manual page 4

Applying the label
1. Applying the 1080P LABEL
Apply the 1080P LABEL to the bottom left of the FRONT PANEL, as shown on the diagram below.
Taper line
(Bottom of panel)
0.5mm ± 0.3mm
2. Applying the LABEL CI (for E3)
Apply six LABEL CI to the CARTON CASE (5910), as shown on the diagram below.
(The same label is used in all positions.)
00D5012272106
8
23.0kg .0880
Denon Brand Company
1080P LABEL
(Apply with a maximum slant of no more than 0.2 mm
in the lengthwise direction.)
FRONT PANEL
Line up the bottom side of the 1080P LABEL with the taper line
at the bottom of the panel, and apply with the left side of the
label 0.5 mm (±0.3 mm) from the edge of the panel.
8
23.0kg .0880
Denon Brand Company
LABEL CI
(Apply with a maximum slant of 0.5 mm)
Line up the LABEL CI with the center (C.L.) of the
C.L.
"DVD-5910" and apply leaving a space of 5 mm (±2 mm).
5mm ± 2mm
ラベルの貼付方法
1. 1080P LABELの貼付方法
1080P LABELは下図のように、FRONT PANEL部の左下に貼付します。
テーパーライン
(パネル下部)
0.5mm ± 0.3mm
2. LABEL CIの貼付方法 (E3)
LABEL CIは下図のように、CARTON CASE(5910)に６枚(共通使用)貼付します。
3 3
8
23.0kg .0880
Denon Brand Company
4
1080P LABEL
(貼付傾きは長手方向で0.2mm以内のこと)
FRONT PANEL部
1080P LABELの下側をパネル下部のテーパーラインに合わせ、
左側をパネルのエッジから0.5mm(±0.3mm)右側へ離して貼付
ます。
00D5012272106
23.0kg .0880
Denon Brand Company
LABEL CI
(貼付傾きは0.5mm以内のこと)
C.L.
LABEL CIを"DVD-5910"のセンター(C.L.)に
合わせて、5mm(±2mm)の間隔を空けて貼付
5mm ± 2mm
ます。
DVD-5910CI/DVD-A1XVA
3 3
8