HeimVision HM203 Manual page 20

Parameter setting >> Wi-Fi Network >> select the Wi-Fi
B: When the camera is moved to another place, please start the camera, you will see the
"Device disconnected" on the main page, and then click "TROUBLESHOOT" to connect
to the Wi-Fi again.
• After sales instruction
1、The product will be updated in real time, if there is update, it will not be
noticed anymore, please visit our official website for reference.
2、Introductions of the basic function of the products are included in the
instruction, please users to read all the information carefully.
3、lf any problems occur in the usage of the video camera, please contact the
Seller
4、We have made every effort to ensure the completeness and correctness of
contents of the instruction, but there may still some deviations between part of
the data and the actual situation, if you have any question or dispute,
5、Losses caused by operating without following the instruction of the manual
book should be assumed by users.
This instruction applies to consumer product.
Kindly reminder: if the instruction is updated, it will not be noticed any more, dual video
recording memory (TF card/cloud storage) is supported by the video camera; to better safeguard
safety of video recording, users could select multiple cloud video recording mode for video
camera via service channels, choosing for monthly/yearly payment for storage.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures: