Table of Contents
Advertisement
Model 9139B Probe Card Adapter Instructions
Section 3: Installation
Keeping operators safe from hazardous voltages depends on proper installation. After installation, but
before energizing the unit, make sure all prober safety shields are properly in place. Refer to the
manufacturer of your specific prober for prober safety shield information.
The light cover contains components that allow installation of an interlock switch, such as that
provided with a Keithley S530 or S535 Parametric Test Systems, as shown in the following figure.
Figure 6: Probe card adapter light cover
Do not operate the system until it is properly installed and all prober safety shields are in
place. Failure to have the complete system properly installed with all safety shields in place
could result in personal injury or death.
9139B-901-01 Rev. A / January 2019
3-3
Advertisement
Table of Contents
