Cobra microTALK PU500 Owner's Manual page 9

Voice Activated Transmit (VOX)
In VOX mode, your microTALK
®
automatically transmitting when you speak. You can set the VOX sensitivity
level to t the volume of your voice and avoid transmissions triggered by
background noise.
To turn VOX mode on or off:
Mode Button
1. Press the Mode button until the VOX icon shown on
the display. The current On or Off setting is displayed.
2. Press the Up or Down button to turn VOX On or Off.
VOX Icon
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press the Talk button to return to Standby mode.
Up/Down Button
To set VOX sensitivity:
Mode Button
1. Press the Mode button until the VOX icon ashes and
the current sensitivity level is displayed.
The current VOX sensitivity level is
displayed with letters "L" and a Number 1
VOX Sensitivity Level
through 5, with Number 5 being the most
sensitive level and Number 1 being the
least sensitive level.
Up/Down Button
2. Press the Up or Down button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press the Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to return to
Standby mode.
11
radio can be used "hands-free,"
Call Alert
Your microTALK radio can alert you to incoming signals by sounding an
®
audible call tone.
Roger Beep Con rmation Tone
Your listener will hear an audible tone when you release the Talk button.
This alerts the other party that you have nished talking and it is OK for
them to speak.
Key Tone
Key Tone is an audible tone which will sound each time a button is pressed.
12