Operating Functions - Vive LVA1034 User Manual

OPERATING FUNCTIONS

Display Screen (mmHg or Lbs)
Soft Mode (Lbs)
Power
Display Screen
• The compressor pump always shows the air pressure
(mmHg) of the mattress on the display screen.
display the patient's weight in Pounds when adjusting the
"Hard or Soft" settings.
Power
• When pushing the power button for first time, the mattress
will begin inflating. This process takes approx. 50 minutes.
When fully inflated, the mattress will begin alternating
automatically.
Hard Mode
• Increases the weight capacity in Pounds.
button each time will increase the weight by increments of
5 Lbs. To increase faster, hold down the button.
Soft Mode
• Decreases the weight capacity in Pounds.
button each time will decrease the weight by increments
of 5 Lbs. To decrease faster, hold down the button.
Static Mode
• Makes the mattress stop alternating and all cells will have
equal pressure. User can adjust the firmness by pressing
the Firm or Soft Key. The display will show the corresponding
mmHg / Lbs.
Seat Inflation Mode
• This allows the patient to set the bed in a seated position.
A "S" will show on the display screen.
Lock/Unlock Mode
• Hold the "Lock/Unlock Mode" for 3 seconds to unlock
panel and adjust settings.
buttons, the panel will lock automatically.
Hard Mode (Lbs)
Firm Static Mode
Automatic Pressure Monitor
Soft Seat Inflation Mode
mmHg / Lbs
Power Lock / Unlock
After 2 minutes of not using the
Static Mode
Seating Mode (60mmHg)
Lock / Unlock Mode
It can also
mmHg / Lbs
Tapping the
Tapping the