Quick Start; Keys Description; Install Sim Card And Battery - Hyundai D250 User Manual

Table of Contents

2.Quick Start

Number keys: Input numbers and characters; customize number keys 1 as the

shortcuts of voice mail.

Left soft key: Execute the functions displayed in lower left corner of the screen; in

the standby state, press this key to enter main menu.

Right soft key: Execute the functions displayed in lower right corner of the screen.

And you can use it to delete the anterior letter near the cursor which you have input

in the message or exit the interface of editing when there is no letter in the message.

In the standby state, press this key to enter Contacts.

Dial key：Which are used to make phone calls and answer the telephone; in standby

state, adjust the record of the Dialed calls, the Received calls, the Missed calls and

the Rejected calls.

Hang_Up key: It is used to refuse to the telephone; generally press this key to return

to standby state under the other condition. Press and hold this key to open/close the

mobile phone.

Left/Right key: Move cursor to the left or right while editing.

Up/Down key: Press to browse names, telephone numbers, short messages,

submenus and so on; move cursor up or down while editing.

OK key: In Standby state, press it to enter the main menu.

* key: In standby state, press this key to switch among *, +; press*,then press the

right function key, will lock the key.

# key: Press this key to input #; switch the input methods while editting; in the

standby state, press and hold it to switch the mode among Silent and Normal.

Note: In this manual, press a key means to press the key and release; press and

hold a key means to press the key and hold for no less than 2 seconds.

Press the Hung_Up key about three seconds; push down and remove the battery

cover.

Fit on the SIM (based on the slot with the sign of "SIM"). When you are installing the

SIM card, please make the contact dot down (make sure the direction of the gap on

the SIM card is consistent with the slot) and then put the SIM card inside the slot until

the full match .

Make the metal contact part of the battery aim at the contact pad position and fit on

it.

Table of Contents