Table of Contents
Advertisement
Getting started
1. Unit power on
Press the [END] key for a moment (approximately 3 seconds) in order to turn on the
power of the unit.
2. Unit power off
Press the [END] key for a moment in order to turn off the power of the unit.
3. Making calls
Press the [END] key for a moment in order to turn on the power of the unit.
If a message "Insert SIM card" appears, insert the SIM into the SIM slot.
Unlock the handset by inputting the PIN (maximum 8 letters) when applicable
If a wrong PIN is inputted, the system automatically detects the network the user belongs
to.
Press the telephone number including the area code in the initial mode. Then attempt to
make a call by pressing the [Send] key. If you would like to make overseas calls, press
the [0] key until the sign '+' appears and then input the country code, area code,
telephone number in your order. You can insert the sign 'P' between each code and
telephone number in order to have approximately 2 seconds of pause by pressing the
[#] key. You can make emergency calls without a SIM. If you input the number 112 and
press the [Send] key, you can make an emergency call.
4. Finishing calls
Pres the [END] key if you would like to cancel or finish your call.
5. Taking calls
When the unit rings in a melody or vibrates, if it has network service, the name or the
telephone number of the caller appears on the screen. The screen says the name only
when you have the number and name saved in the Phone Book. Press the [SEND] key if
you would like to take a call in general mode. If the receiving mode is set to [Any key],
You can take calls by pressing any key except for the [END] key.
6. Adjusting the volume of conversations
Advertisement
Table of Contents
