Care And Maintenance - Chicco Zoom Trike Instructions Manual

HOW TO USE THE TOY
The seat of Zoom Trike can be adjusted to three different positions, simply by tightening the screw located
on the seat in the three different positions marked on the tube (Diag. 7 enlarged side view of the saddle).
This allows the child to use Zoom Trike with maximum comfort in the various phases of growth. Every time
the seat is adjusted to a different position, it is recommended to check that the seat is locked correctly into
position and that the screw is tightened firmly.
To allow the parent to accompany the child when it uses Zoom Trike, it is possible to attach an extendable
handle (component A) to the tricycle. When the tricycle is used in this play mode, it is important to lock the
handlebar, using the device located on the front fork. To carry out this operation, position the handlebar in
such a way so as to align the two marks located on the fork and shaft (Diag. 8 front view). To lock the han-
dlebar, lower the yellow guide (Diag. 9) in order to lock the movement of the handlebar. Check repeatedly
that the handle bar is firmly locked into position.
To unlock the handlebar, carry out the above operations in the reverse order.
The hole located on the rear end of the frame (Diag. 10) has been specifically designed for inserting and
attaching the extensible handle inside the tube (Diag11).
The handle can be attached through a piston, that must be kept facing downwards (Diag. 12) until fitted
into the specific housing. A 'click' will be heard, indicating that the piston is locked into position. In any case,
it is recommended to check that the piston is locked safely by pulling the handle.
To unlock the extendable handle, carry out the above operations in the reverse order.
Through the same locking system operated with a piston device, located on the handle, the length of the
shaft can be adjusted as needed (Diag. 13). Also in this case, a 'click' will be heard, indicating that the shaft
is locked into position. It is recommended to check that the shaft is locked correctly, trying to pull and push
the handle several times.
Zoom Trike has an automatic pedals locking device that, when the tricycle is pushed with the handle, it
allows the child to place its feet on the pedals avoiding that they turn together with the wheel (Diag. 14).
The tricycle also has a storage basket (Component B), that can be positioned behind the seat, on the two
supports located on the rear forks (Diag. 15).

CARE AND MAINTENANCE

• The cleaning and maintenance of the trike must only be carried out by an adult.
• Always dry the metal parts to prevent the formation of rust if the trike has come into contact with water.
• Clean the trike with a damp, soft cloth if needed. Do not submerge the trike in water.
• Protect the trike from shocks, heat, dust, sand, humidity and water.
• Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant.
• Regularly check the condition of the wheels and, keep them clean, free of dirt, dust and sand.
Made in Italy
9