Table of Contents
Advertisement
– Optional manual transmission: Change the
transmission fluid and clean the oil filter.
NOTE: this does not apply to the standard
equipment M-DCT Drivelogic transmission.
Maintenance services that display in
CBS
Front brakes
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness,
replace as necessary.
Optional M Carbon Ceramic Brakes: Visually
check for brake disc wear using the surface
wear indicators.**
Rear brakes
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness,
replace as necessary.
Optional M Carbon Ceramic Brakes: Visually
check for brake disc wear using the surface
wear indicators.**
Parking brake: Repair or replace parking brake
shoes/linings only if a reduction in the brake's
effectiveness is noted. When fitted, parking
brake shoes/linings are excluded from
coverage under the BMW Maintenance
Program.
**Carbon Ceramic Brake System brake rotors
and pads are not covered under the BMW
Maintenance Program.
Vehicle check
Maintenance work:
Check operation of horn, headlight flasher and
hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: Turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, luggage area lights.
Safety belts: Check condition and function.
Check windshield wiper and washer jet
positions.
Tires: Check tread depth, wear pattern, outer
condition, inflation pressure. If necessary,
correct pressure.
Reset Tire Pressure Monitor.
Battery: Check state of charge (magic eye) and
charge, if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Convertible: Open the convertible top. Activate
automatic rollover protection system via OBD
diagnostic link.
Rear-view mirrors.
Coolant: Check fluid level and concentration.
Windshield washer and intensive cleaning
systems: check protection level, fluid level, top
off if necessary.
Check expiration date on the M Mobility
System sealant bottle. Change sealant bottle,
if needed.
Brake system connections and lines: check for
leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e.,
transmission, rear axle, fuel lines, exhaust
system): Check for damage, leaks and
corrosion.
Steering components: Check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of:
– Steering
– Shock absorbers (visual)
– Transmission
Brake fluid
Maintenance work:
Replace brake fluid.
7
Advertisement
Table of Contents
