Acer Aspire One 722 Service Manual page 131

10. Remove the drives (Refer to
11. If the Issue is still not resolved, refer to
Abnormal Video
If the video appears abnormal, perform the following, one at a time.
1. Boot the computer.
If permanent vertical/horizontal lines or dark spots appear in the same location, the

LCD is faulty and should be replaced. (Refer to
If extensive pixel damage is present (different colored spots in the same locations on

the screen), the LCD is faulty and should be replaced. (Refer to
Flowchart)
NOTE:
NOTE:
Make sure that the computer is not running on battery alone as this may reduce display
brightness.
2. Adjust the brightness to its highest level. Refer to the User Manual for instructions on
adjusting the settings. If the display is too dim at the highest brightness setting, the LCD is
faulty and should be replaced. (Refer to
3. Check the display resolution is correctly configured:
Minimize or close all Windows.

If display size is only abnormal in an application, check the view settings and

control/mouse wheel zoom feature in the application.
If desktop display resolution is not normal, right-click on the desktop and select

Personalize Display Settings.
Click and drag the Resolution slider to the desired resolution.

Click Apply and check the display. Readjust if necessary.

4. Roll back the video driver to the previous version if updated.
5. Remove and reinstall the video driver.
6. Check the Device Manager to determine that:
The device is properly installed. There are no red Xs or yellow exclamation marks

There are no device conflicts

No hardware is listed under Other Devices

7. If the Issue is still not resolved, refer to
8. Run the Windows Memory Diagnostic from the operating system DVD and follow the
on-screen prompts.
9. If the Issue is still not resolved, refer to
Troubleshooting
Maintenance Flowchart).
Online Support
Maintenance
Online Support
Online Support
Information.
Maintenance Flowchart)
Maintenance
Flowchart)
Information.
Information.
0
4-7