Windows 2000: Modifying A Workgroup Name - Hercules HWNAP-300 Manual

Hercules Wireless N Access Point

4.4.5.Windows 2000: Modifying a workgroup name

It may happen that you need to change the name of your workgroup (advanced users only). To do so,
proceed as follows:
68/94 – User Manual
5. In the list displayed, double-click the computer connected
to the printer.
6. Select the shared printer, then click Next.
7. If you wish, set the shared printer as the default printer,
then click Next.
8. Click Finish to close the Wizard.
You can now use the network printer thanks to your WiFi
connection. For more information on sharing a printer, please
refer to your printer's manual.
1. Click Start/Settings/Control Panel.
System.
2. In the System Properties window, select the
Network Identification tab.
3. Click the Properties button.
HWNAP-300
Double-click