Connecting To A Network In Master Mode - Hercules HWNAP-300 Manual

Hercules Wireless N Access Point

2.7.1.Connecting to a network in master mode

Note: by default, your Hercules Wireless N Access Point is configured to master mode, meaning that it will
serve as the access point to which other WPS devices will be able to connect.
1 option: use the WPS button located on the Access Point
st
2 nd option: use the WPS button accessible in WiFi Manager N
28/94 – User Manual
- On your WiFi access point: press the WPS button
side of the access point.
You now have two minutes to connect your Hercules Wireless N USB
Key to the access point. You will not have to repeat this step the next
time you connect.
- Press the WPS button located on the side of the Hercules
Wireless N Key or the WPS button on a WPS-compatible device.
- On the WiFi Manager N home page, press the
Automatic WiFi client connection (WPS) button.
Push-Button Configuration method (PBC) is
selected by default.
- Click the
Alternatively:
- Select Personal Identification Number method
(PIN code).
- Enter the PIN code of the WPS device you wish to
connect.
- Click the
To find out the PIN code for your WPS device, please
refer to section 4.3.3. Connecting to a network with
a PIN code in the user manual of your Hercules
Wireless N USB Key, or refer to the manual supplied
by the manufacturer of your WPS device.
located on the
connection button.
connection button.
HWNAP-300