Table of Contents
Advertisement
speaker volume and L8 is the maximum.
Outgoing Announcement
When the unit answers a call, an outgoing message is played to callers
You can use either:
-
your own outgoing message
-
a pre-recorded outgoing message
Recording Outgoing Announcement
You can record the outgoing message through the base microphone or handset microphone
Base:
1.
Press and hold [
2.
After a beep sounds, you should move 9 inches from the base microphone and speak clearly into the base
microphone. (2 minutes max)
3.
Release [
] to stop recording
Handset:
1.
[
]
2.
[
]/[
]: "ANSWERER"→[OK]
3.
[
]/[
]: "RECORD OGM"→[OK]
4.
[
]/[
]: "RECORD MSGS" OR 'ANSWER ONLY"→[OK]
5.
[
]/[
]: "RECORD OGM"→[OK]
6.
After a beep sounds, hold the handset about 8 inches away and speak clearly into the microphone (2
minutes max.)
7.
Press [
] to stop recording
8.
[
]
Using a pre-recorded Outgoing Announcement
If you erase or do not record your own outgoing message, the unit plays a pre-recorded message asking callers to leave a
message.
Resetting to a pre-recorded Outgoing Announcement
If you want to use a pre-recorded outgoing message once you record your own greeting message, you need to erase your
own outgoing message.
1.
[
]
2.
[
]/[
]: "ANSWERER"→[OK]
3.
[
]/[
]: "RECORD OGM"→[OK]
4.
[
]/[
]: "RECORD MSGS" OR 'ANSWER ONLY"→[OK]
5.
[
]/[
]: "DELETE"→[OK]
6.
The handset shall play back the pre-recorded outgoing message
7.
[
]
]
Advertisement
Table of Contents
