Page 1
User Manual Keys and Parts (Front and Back) 1. Receiver 7. Back key 2. Display Screen 8. End/Power key 3.
Page 2
Phone layout Keys and Parts 11 Brief Intro to the Phone Charging the mobile phone The mobile phone uses a rechargeable battery. Note: Please use the specific battery, otherwise it may cause explosion. New battery needs charging and discharging completely three times (the time for every charging should be around 12 hours). It is recommended to charge the mobile phone after it turns off automatically due to low battery power. a. Plug the charger into the power supply, then plug the USB connector into the USB jack correctly. ...
Page 3
b. In the “On” state, if the connection succeeds, “Charger connected” will display on the screen. c. After the battery is full charged, the icon is full of bars. Basic operation 1. Switch on Insert ...
Page 4
Press call key to answer an incoming call; press End/Power key to reject the call. 6. Speed dial Tap main menu key, go to main menu > Phonebook, tap “Options”> Phonebook settings, scroll down to Speed dial, set speed dial On and set numbers. While on standby mode, long press any of the number keys from 2~9 to make a speed dial call. 7. Latest calls The device can store 30 latest calls logs. In standby mode, press call key and the call logs from SIM card will display. 8. Options during call While engaged in a call, you can tap Left Soft key and you can use the following options: ...
Page 5
f. Messages: While engaged in a call, you may browse and/or send/receive SMS. g. Sound recorder: you can start to record the call. h. Mute: On/Off. i. DTMF: You can set DTMF here. j. Volume: When you engaged in the call, you can decrease and increase the volume by pressing Left or Right navigation key. 9. Connect to voice mail (Network dependent) The handset allows you to transfer the incoming call into the voicemail and then you can receive a notice with voice message. The number of the voicemail center must be set first. ...
Page 6
On Home screen, tap Main menu key > Settings > Security settings > Phone security > Phone lock, you will be asked for “input phone password”, please input “1122”. After you activated the phone lock, you would be asked for a password the moment you power on the device next time, please input “1122” again. ...
Page 7
‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment. ...
Need help?
Do you have a question about the Lanix T1080 and is the answer not in the manual?
Questions and answers