Automatic Reconnection - NATIVE UNION SWITCH Instruction Manual

CONNECTING
CONNECTINg
1. Make sure your SWITCH is powered off.
2. Press and hold the button until the red
and white LED flash alternately; you are now
ready to pair.
3. activate the Bluetooth ® setting on your
device (the device needs to be within a
metre of the SWITCH) .
4. Your device will either automatically
search for available Bluetooth
alternatively manually instruct your device
to search for Bluetooth
5. Select SWITCH
• If asked enter password 0000
The white LED will flash every 3 seconds.
You will hear a conformation sound,
you are now connected
BluETOOTH wIrElEss raNgE
The Bluetooth wireless range is up to 10
metres from your mobile device

auTOmaTIC rECONNECTION

devices or If your mobile device goes out of range
®
the white LED will flash. When the last
® devices. connected mobile device is back in range
the mobile device will automatically
reconnect and the white LED will flash every
3 seconds.
If your mobile device does not automatically
reconnect, use your mobile devices
Bluetooth
You only need to pair your device once.
To pair other devices please repeat the
above steps. You can pair up to 8 devices.
® menu to reconnect manually.
English
7