STANDBy Up to 180 hours POwErINg uP BaTTEry sTaTus Using the USB cable, plug your SWITCH into Use the battery status button, located a power source. It takes 4 hours to fully on the base, to check the current charge.
ON - Off LOW BATTERy – the red LED will flash button POWER BANK Use your SWITCH as a power bank (charging source) for your mobile, smartphone, tablet or camera. Connect your mobile device to SWITCH using the USB Out port.
SWITCH is now on. Repeat to turn off. 2. sTaNdBy mOdE ON - Off Your SWITCH will automatically go into standby mode when no Bluetooth device ® is connected for 15 minutes. To wake-up your SWITCH turn the wheel, or click the button.
CONNECTINg the mobile device will automatically 1. Make sure your SWITCH is powered off. 5. Select SWITCH reconnect and the white LED will flash every • If asked enter password 0000 3 seconds.
Page 8
English LISTENING COMMUNICATING lIsTEN Press the button once to play and pause Use SWITCH to play audio either through music. Use SWITCH as a conference call unit. Bluetooth ® or using the Aux Line IN with a 3.5mm Stereo cable. (3.5mm Stereo audio...
Output Power Class Class 2 via the line-out port Max Range 10 m lasT NumBEr rEdIal - on your mobile device switch the audio Supported profiles HSP, HfP, a2DP, aVRCP Double click the button output / input to your chosen option. Speaker...
To prevent possible hearing damage, do not listen warranty termination. - To avoid electrical shock, do not at high volume levels for long periods. attempting to disassemble your SWITCH disassemble. Refer servicing to qualified...
Need help?
Do you have a question about the SWITCH and is the answer not in the manual?
Questions and answers