Controls And Functions - BenQ TK800M User Manual

Controls and functions

Projector & Remote control
All the key presses described in this document
are available on the remote control or projector.
1
2
3
4
5
11
2
12
15
7
3
5
17
18
20
21
22
1. POWER indicator light/TEMPerature
warning light/LAMP indicator light
See
6
2.
7
8
Toggles the projector between standby mode
and on.
9
10
Toggles the projector between standby mode
and on.
3. OK
Confirms the selected On-Screen Display
(OSD) menu item.
4. MENU
Turns on the On-Screen Display (OSD) menu.
5. BACK
Goes back to previous OSD menu, exits and
2
saves menu settings.
13
6. IR remote sensor
14
7. Arrow keys ( ,
16
When the On-Screen Display (OSD) menu is
10
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys (
Display the keystone correction page.
4
8
Volume keys
Decrease or increase the projector volume.
8. SOURCE
19
Displays the source selection bar.
9. ECO BLANK
Used to hide the screen picture.
9
Indicators on page 42.
POWER
ON/ Off
, ,
,
/
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or even
cause a fire.
)
)
Introduction 9