1. Manuals
  2. Brands
  3. Aeon Labs Manuals
  4. Remote Control
  5. Minimote
  6. Manual

Aeon Labs Minimote Manual

Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
AEO_MREM_B
Aeonlabs Minimote black
Firmware Version : 1.0
Quick Start
R
This device is a Z-Wave Remote Control.
Use Network Management Buttons to include and exclude devices to the remote controls network and use the LEARN button to
include the minimote into a different network. Pushing the LEARN button for 5 sec will wake up the device.
Please refer to the chapters below for detailed information about all aspects of the products usage.

Product description

The Aeon Labs mini remote control can control a variety of Z-Wave compatible devices such as switches, dimmers, window blinds
and motion sensors. The device can include and exclude devices, group them and set and release associations. The mini remote
only offers four control buttons for scene selection. Behind a slider there are four more buttons for Z-Wave network control. A non-
replaceable but rechargeable battery powers the remote control. Recharging is done on a conventional USB bus using the charging
cable provided. The product is in the color black.

Installation Guidelines

The device is ready for use. In case there are no LED signals when hitting the buttons the device needs to be recharged using the
USB cable provided.
1
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, www.zwaveeurope.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Minimote and is the answer not in the manual?

Questions and answers

Related Manuals for Aeon Labs Minimote

Summary of Contents for Aeon Labs Minimote

  • Page 1: Quick Start

    Use Network Management Buttons to include and exclude devices to the remote controls network and use the LEARN button to include the minimote into a different network. Pushing the LEARN button for 5 sec will wake up the device. Please refer to the chapters below for detailed information about all aspects of the products usage.
  • Page 2 Operating the device The Minimote has 4 scene control buttons. A scene defines a certain switching state for a number of devices connected to this scene. A single click on the scene button will then turn all these devices into the desired switching state. Below the cover there are 4 dedicated buttons for network management.
  • Page 3 NIF. Before releasing the scene button turn the device into the desired state. After the button is released the minimote will detect the status of the device and store it in the scene.
  • Page 4 Shift Primary Role to a different Controller The device can hand over its primary role to another controller and become secondary controller. The primary shift is initiated on the device by pressing the "Learn" button. Set association between two device in Z-Wave network The controller is able to set association between two other devices in the network.
  • Page 5 Learn Mode Mode of Button 2 (upper right) (Parameter Number 242, Parameter Size 1) Defines the switching mode of Button 2 Value Description Factory Default (Default) Scene Mode Add Mode Remove Mode Association Mode Learn Mode Mode of Button 3 (lower left) (Parameter Number 243, Parameter Size 1) Defines the switching mode of Button 3 Value...
  • Page 6 Factory Default (Default) Scene Mode Add Mode Remove Mode Association Mode Learn Mode Mode of Button 6 (marked as Exclude) (Parameter Number 246, Parameter Size 1) Defines the switching mode of Button 6 Value Description Factory Default (Default) Scene Mode Add Mode Remove Mode Association Mode...

  • Page 7: Technical Data

    Learn Mode Technical Data Explorer Frame Support 4.50 beta Device Type Slave with routing capabilities Generic Device Class Binary Switch Specific Device Class Binary Power Switch Routing FLiRS Firmware Version (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, www.zwaveeurope.com...

Table of Contents