Snapper MR216017B Safety Instructions & Operator's Manual
  1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. MR216017B
  6. Safety instructions & operator's manual
Snapper MR216017B Safety Instructions & Operator's Manual

Snapper MR216017B Safety Instructions & Operator's Manual

21" steel deck walk mowers “m” model series 17
Hide thumbs Also See for MR216017B:
Table of Contents

Advertisement

Quick Links

MODEL DESIGNATION
SELF-PROPELLED
CUTTING WIDTH
M – Model Designation
W – Model Designation
21 – 21" Cutting Width
60 – 6.0 HP 65 – 6.5 HP (Engine Horse Power)
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2, 3, & 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
M
R
P – Self Propelled Model
R – Recycling Model
21" STEEL DECK
WALK MOWERS
P
21
60
17 - Series Designation
B – Briggs & Stratton Engine
V – Overhead Valve Engine
"M" MODEL
SERIES 17
MODELS
PUSH
PROPELLED
MODEL
MR216017B
MR216017BV
WMR216017B
WMRP216017B
WMR216017BV
MR216517B
17
BV
SERIES DESIGNATION
ENGINE HORSE POWER
MANUAL No. 7-4349 (Rev. 1, 2/3/03)
MODEL
MRP216017B
MRP216017BV
MRP216517B
ENGINE TYPE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MR216017B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Snapper MR216017B

Summary of Contents for Snapper MR216017B

  • Page 1 60 – 6.0 HP 65 – 6.5 HP (Engine Horse Power) Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2, 3, & 4. Remember that all power equipment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

  • Page 3: Safe Handling Of Gasoline

    IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.
  • Page 4 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices. 12. Use only genuine SNAPPER replacement parts...

  • Page 5: Table Of Contents

    WARRANTY AND PRODUCT REGISTRATION ... 23 - 24 PRIMARY MAINTENANCE ... 25-28 The pictures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your local SNAPPER dealer if you have questions. ! IMPORTANT !

  • Page 6: Section 1 - Familiarization

    FIGURE 1.1 1.2 NOMENCLATURE The nomenclature drawing above, Figure 1.1, shows the essential parts of the SNAPPER WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating.

  • Page 7: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2.

  • Page 8: Starting & Operation

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION WARNING Stop engine and mower blade by releasing the blade control before adjusting ground speed. 2.2.2. PROPELLING MOWER (Self Propelled Model Only) 1. Stop engine and mower blade by releasing the blade control before adjusting ground speed.

  • Page 9: Recycling Operation

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 10: Installation Of Grass Bag (Slide Closure Type)

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 11: Installation Of Discharge Deflector

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 12: Section 3 - Maintenance

    1. Remove transmission fill plug. See Figure 3.2. 2. If liquid grease IS NOT visible on the input gear (the small gear below the plug hole), add an amount, to cover gear, of Snapper “00” grease. See Figure 3.2. FILL proper NOTE: Snapper “00”...

  • Page 13: Check Mower Blade

    Section 3 - MAINTENANCE 3.2.2. CHECK GREASE LEVEL IN TRANSMISSION NOTE: Do not spill grease or oil on surface of drive disc. See Figure 3.3. 3. Reinstall transmission plug. 4. Check grease level after each 25 hours of operation. KEEP DRIVE DISC CLEAN ! FIGURE 3.3 WARNING DO NOT attempt any maintenance, adjustments or...

  • Page 14: Section 4 - Adjustments & Repair

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 15: Wheel Drive Control Adjustment

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 16: Driven Disc Adjustment

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 17: Driven Disc Adjustment

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 18: Driven Disc Replacement

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 19: Belt Service

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 20: Transmission Poly-V Belt Replacement

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 21: Troubleshooting

    1. Service mower blade. 2. Service and tighten loose parts. 3. Replace air lifts. Tighten to proper torque. 4. Replace belt. 1. Contact authorized SNAPPER dealer. 2. Replace engine drive belt. 3. Reinstall belt onto pulley. Check for damage. 4. Replace Poly-V belt.

  • Page 22: Service Schedule

    ITEM SERVICE PERFORMED Check Oil Level Engine Oil Initial Oil Change Periodic Oil Change Clean Sponge Element Air Pre-Cleaner Clean or Replace Air Cleaner Replace Spark Plug Engine Cooling Clean Shroud & Fins System Check For Wear And Drive Belts Tension Mower Blade Check For Wear, Damage...

  • Page 23: Year Limited Warranty

    For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.
  • Page 24 Date of Purchase _______________________________________________________ Retailer _______________________________________________________________ Retailer’s Phone Number________________________________________________ It is very important that you register your purchase with Snapper to ensure warranty coverage. Please mail your product registration card to: Snapper at P.O. Box 1379, McDonough, Georgia 30253. Or you may register on line at www.snapper.com.

  • Page 25: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 26 PRIMARY MAINTENANCE...
  • Page 27 PRIMARY MAINTENANCE...
  • Page 28 PRIMARY MAINTENANCE...
  • Page 29 NOTES...
  • Page 30 NOTES...
  • Page 31 NOTES...

  • Page 32: Important

    “M” MODEL SERIES 17 Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.

This manual is also suitable for:

Mr216017bvWmr216017bWmr216017bvMr216517bMrp216017bMrp216017bv ... Show all

Table of Contents