Volume/Mute Control And Punch-Through Feature; Setting All Volume/Mute Control To Any One Mode; Setting Any Mode To Use Its Own Volume/Mute Control - Maxview URC6D User Manual

Volume/Mute Control and Punch-Through Feature

This remote lets you select which device Mode controls your Volume/Mute
buttons. The remote is initially set (factory default) for all device Modes
programmed with "Visual" codes (e.g TV, VCR, DVD, DVR, SAT, & CABLE)
and "Audio" codes (e.g CD & AUDIO) to use their own Volume/Mute control
if present. If the programmed "Visual" code has no Volume/Mute operation
of its own then those buttons will punch through control to the TV Mode
device without needing to change to TV Mode.
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/ Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to "punch-through" to any one chosen Mode
for Volume/Mute button control without the need to change to that Mode.
1. Press and hold the SET UP button until the red indicator turns on,
then release the button.
2. Press and hold the MUTE button until the red indicator blinks off,
then release the button.
3. Press and release the desired Mode button (TV, VCR, etc.) for
Volume/Mute control, the red indicator blinks then stays on.
4. Press and release the MUTE button and the red indicator turn off.
The red indicator will blink rapidly for three seconds if the Mode you
have selected has no Volume/Mute control.
5. All other Modes will now punch-through to your chosen Mode for
Volume/Mute control.
6. All "Visual" and "Audio" programmed Modes will now punch through
to the respective Modes you have chosen for Volume/Mute control.
Setting any Mode to use its own
Volume/Mute Control
This routine can set any Mode to use only its own Volume/Mute control.
Note - If your chosen Mode has no Volume/Mute functions of its own then
the Volume/ Mute buttons will do nothing.
1. Press and hold the SET UP button until the red indicator turns on,
then release the button.
2. Press and hold the MUTE button until the red indicator
blinks off, then release the button.
3. Press and release the desired Mode button (TV, VCR, etc.),
the red indicator blinks then stays on.
4. Press and release the VOLUME (Down) button, the red
indicator blinks then stays on.
5. Press and release the MUTE button and the red indicator turns off.
6. All "Visual" and "Audio" programmed Modes will now punch through
to the respective Modes you have chosen for Volume/Mute control.
5