Troubleshooting - Samsung DVD-D360K User Manual

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.
Problem
• Press the ®|| button (in front panel) for more than 5 seconds under no
The screen is blocked.
disc inside. All setting will revert to factory settings.
• Press the ®|| button (in front panel) for more than 5 seconds under no
Forgot password. disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
• Check the Video output is HDMI enabled.
No HDMI output • Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/ 576p/720p/1080i/1080p DVD player.
Abnormal HDMI output • If snow noise appears on the screen, it means that TV does not
screen. support HDCP (High-bandwidth Digital Content Protection).
• Check your TV system setup correctly.
• The screen Jitter phenomenon may occur when frame rate is converted from 50Hz to
HDMI output Jitter
60 Hz for 720p/1080i/ 1080p HDMI (High Definition Multimedia Interface) Output.
• Please refer to the user's manual of your TV.
14
Action
Spesifications
Power Requirements
Power Comsumption
General Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Composite Video
Component Video
Video Output
Scart Jack
HDMI
(Only DVD-D530)
Output terminal
Maximum Output Level
Audio Output
Frequency Response
Digital Audio Out
AC110~240V, 50/60Hz
For the power supply and power
consumption, refer to the label attached
to the product
1.2 Kg
360mm(W) X 207mm(D) X 42mm(H)
+5ºC to +35ºC
10 % to 75 %
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
R(Red) : 0.7 Vp-p (75 Ω load)
G(Green) : 0.7 Vp-p (75 Ω load)
B(Blue) : 0.7 Vp-p (75 Ω load)
Composite Video : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.3 Vp-p (75 Ω load)
480p, 576p, 720p, 1080p, 1080i
RCA,
SCART
2Vrms
20 Hz to 20 kHz
Coaxial terminal (S/PDIF)