Troubleshooting Table - Kohler K-99693 Installation And Care Manual

Complete the Installation (cont.)
Refer to the "System Controller Installation and Care Guide" for
download instructions.
For information on system setup and using the interface, refer to
the guide on the product page at www.us.kohler.com.
4. Troubleshooting
IMPORTANT! Turn off the power before performing any
maintenance.
NOTE: For service parts information, visit your product page at
www.kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and
installation issues or concerns, call 1-800-4KOHLER.

Troubleshooting Table

Symptoms Probable Cause
Interface is not A. Controller is not
1.
lit.
B. Interface cable
C. Circuit breaker has
D. The controller may
E. A "cross-over"
Kohler Co.
Recommended Action
A. Plug the controller
plugged into the into an electrical
electrical outlet. outlet.
B. Check all interface
connections may cable connections.
be loose or
disconnected.
C. Reset the circuit
been tripped. breaker.
D. Disconnect and
require resetting. reconnect the
controller power
supply from the
electrical outlet.
E. Connect the interface
cable or coupler to the controller
was used to using a
"straight-through"
connect the
interface to the cable or coupler.
controller.
7 1194161-2-A