Advertisement
LBB-C QuickStart Guide
Important: Disconnect AC power from your console organ, Leslie speaker, and any other connected
equipment before proceeding.
LBB-C Connectors
1
Connect the preamp audio source to the ¼" Input jack
2
Connect to Leslie 147, if available, via 6-pin cable
Connect to Leslie 122, if available, via 6-pin cable
3
Connect Half-Moon Switch, Foot Switch or other compatible speed control input via ¼" Speed Control
4
Switch Input jack
5
Optional input for hardwired speed control switches (Chorale, Off, Tremolo)
AC Select Switch (Position L(1): LBB is powered OFF; Position X(2): LBB is powered by AC power cord and can
6
support two Leslie speakers)
7
Normal/Enhanced switch – Normal operation provides Fast/Slow on Leslie; Enhanced adds Stop to Leslie
speakers equipped with Trek II relays
8
Connect red power cord to AC power outlet, such as Reverb outlet on stock Leslie amp. Be sure to set AC
Select Switch to X(2) position
Power up your guitar, keyboard, and any other connected equipment and test.
7
6
Congratulations! Your Leslie is now enhanced by the LBB Breakout Box.
WW W.BOOKE RL AB. COM
1
8
2
4 5
|
864.843.4459
3
|
Proudly Made in the USA
®
Leslie is a registered trademark of Hammond Suzuki Corporation.
Advertisement
