BookerLab LBB-C Quick Start Manual

LBB-C QuickStart Guide
Installation of the LBB-C varies based on your specific console and Leslie setup. Machine bolts and screws are provided
for a variety of mounting options. Refer to the LBB manual, available online, for detailed installation instructions.
Product information, manual and accessories can be found online: www.bookerlab.com/product/lbb
Important: Disconnect AC power from your console organ, Leslie speaker, and any other connected
equipment before proceeding.
What's in the box?
> LBB-C – LBB Breakout Box Model C with ¼" Input Jack
> CA724-RED – 110 VAC 18AWG NEMA 1-15P to C7 1M power cord (Red heat shrink)
> KT137 – Accessory bag with:
- (2) 10-24 machine bolts, black stainless
- (4) 3/4" wood screws, black stainless
- (4) 3/16" flat washers, black stainless
- (4) 4" plastic mini cable ties, nylon
- (4) self-adhesive rubber mounting feet
What's Required?
- ¼" TS cable and audio source from preamp input (e.g., guitar preamp, keyboard, etc.)
- External speed control (console switch, half-moon switch, footswitch, etc.) with ¼" TRS connector
W WW.BOOKER LA B. COM
| |
864.843.4459
®
Leslie is a registered trademark of Hammond Suzuki Corporation.
Proudly Made in the USA
D19