Accessories; Warranty; Eu Declaration Of Conformity . En - Kärcher IB 7/40 Classic Manual

Compressed air demand
A Pressure in MPa
B Pressure in bar
C Volume stream in m /min
3
1 straight nozzles
2 angled nozzles
Sound
A Pressure in MPa
B Pressure in bar
C Noise level in dB(A)
1 Round jet nozzle, short
2 Flat stream nozzle, short
3 Flat jet nozzle, angled
4 Round jet nozzle, long
5 Flat stream nozzle, long, included in de-
livery
Sound power level
A Pressure in MPa
B Pressure in bar
C Noise level in dB(A)
1 Round jet nozzle, short
2 Flat stream nozzle, short
3 Flat jet nozzle, angled
4 Round jet nozzle, long
5 Flat stream nozzle, long, included in de-
livery
20

Accessories

Protective clothing
Full view protective goggles, anti-conden-
sation, part no.: 6.321-208.0
Cold protection gloves with anti-slip profile,
category III as per EN 511, part no.: 6.321-
210.0
Ear protection with headgear, part no.:
6.321-207.0
Jet equipment
Round jet nozzle, short
Part no.: 4.321-236.0
Round jet nozzle, long
Part no.: 4.321-234.0
Flat stream nozzle, short
Part no.: 4.321-237.0
Flat stream nozzle, long, included in deliv-
ery
Part no.: 4.321-235.0
Round jet nozzle, angled
Part no.: 4.321-249.0
Flat jet nozzle, angled
Part no.: 4.321-250.0
Scrambler
Part no.: 4.110-015.0
Nozzle extension, 300 mm long
Part no.: 5.760-001.0
Handle
Part no.: 4.321-248.0
Working light
Part no.: 2.815-421.0

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
9
-
EN
EU Declaration of Conformity
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product: Dry ice jet unit
Type: 1.574-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/35/EU
2014/30/EU
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 60335–1
EN 61000–3–2: 2014
EN 61000–3–3: 2013
Applied national standards
GS-STE-13 (based on it)
The signatories act on behalf of and with
the authority of the company management.
Chairman of the Board of Management Director Regulatory Affairs & Certification
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/01/01