Technical Specifications - Kärcher IB 7/40 Classic Manual

Fault Possible cause
No dry ice pel- Dry ice dosing switched off (IB 7/40 Advanced on-
lets in the com- ly), button "Dry ice dosing on/off" on the jet gun
pressed air jet lights glows red, display shows "Ice off".
Dry ice container is empty
Dry ice has melted
Vibrator on the dry ice container is not working
Drive motor of the dosing equipment is overload-
ed
Compressed air is exiting into the dry ice contain-
er
Dosing disc in the dosing unit is defective
Electrical connection
Voltage
Current type
Frequency
Connected load
FI safety switch
Compressed air
Nominal width of hose
Pressure supply (max.)
Pressure supply (min.)
Compressed air consumption
Quality of compressed air
Performance data
Jet pressure (max.)
Diameter of dry ice pellets (max.)
Dry ice consumption
Dimensions
Contents of dry ice container
Width
Depth
Height
Weight of IB 7/40 Classic, ready to operate
Weight of IB 7/40 Advanced, ready to operate
Weight of IB 7/40 Classic, empty, without acessories
Weight of IB 7/40 Advanced, empty, without acessories
Weight of the jet equipment (spray agent hose, spray gun, tool case)
Recoil force of hand spray gun (max.)
Torque of jet pistol (max.), only with angled nozzle
Machine vibrations
Jet pistol
Hose for spraying agent
Remedy
Press the dry ice dosing key on the jet pistol.
Refill the dry ice container
Empty the dry ice container and refill it with fresh
dry ice pellets.
Call Customer Service.
Let the dosing thaw
Clean the pressure balance channel in the dosing
equipment.
Replace the dosing disc.

Technical specifications

8
-
EN
V 100...110
1~
Hz 50
kW 0,6
delta I in A 0,03
Inch 1/2
MPa (bar) 1,0 (10)
MPa (bar) 0,2 (2)
m /min 0,5...3,5
3
min. Class 3, ISO 8573-1
MPa (bar) 1,0 (10)
mm 3
kg/h 15...50
kg 18
mm 510
mm 768
mm 1096
kg 96
kg 98
kg 70
kg 71
kg 6,75
N 30
N 8
m/s² 1,2
m/s² 1,2
By whom
Operator
Operator
Operator
Operator
Operator
Customer
Service
Customer
Service
19