EnGenius EnStationACv2 User Manual page 23

To attach the ENS500-ACv2/ENS500EXT-ACv2
to a wall using wall mounting kit.
A. Determine where the Access Point to be placed and
stick the Adhesive label on the surface.
B. Use the appropriate drill bit to drill two 8.1mm
diagramand 26mm depth holes on the markings of the
label.
C. Remove the label and screw the anchors unto the holes
until they are flush with the wall.
D. Screw the included screws into the anchors. Place the
AccessPointagainstwallwiththemountingscrewheads.
To attach the ENS500EXT-ACv2 to a pole using
the provided pole mounting kit:
A. Thread the open end of the Pole Strap through the two
tabs on the Pole Mount Bracket.
B.Lockandtighten Pole Strapto secure Pole MountBracket
to thepole.
23