(PJ27) f ) Dress properly. Do not wear loose clothing or jewellery. THANK YOU FOR BUYING A RYOBI PRODUCT. Keep your hair, clothing and gloves away from moving To ensure your safety and satisfaction, carefully read parts. Loose clothes, jewellery or long hair can be caught in through this OWNER’S MANUAL before using the...
Page 5
INSTRUCTIONS FOR SAFE HANDLING j) Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they 1. Make sure that the tool is only connected to the voltage must be serviced before use. Lower guard may operate marked on the name plate.
DISPOSAL OF THE EXHAUSTED BATTERY 2. Loosen the hex. head bolt by turning the wrench counterclockwise while pushing the lock lever. (Fig. 1) Li-ion batteries must be recycled. 3. Remove the hex. head bolt, washer (5) and the outside flange (4). Take the battery to the shop from which it was purchased as 4.
Page 7
It is recommended that you take this tool to a This line guide shows an approximate line of cut. RYOBI Authorized Service Center for a thorough cleaning Make a sample cut in scrap lumber to verify the actual line of and lubrication at least once a year.
Page 8
RYOBI tool (hereinafter called “the Product”), for which it was not designed, or is not suited and no repairs, alterations or modifications is warranted by Ryobi (herein called “the Company”) to be free from defects in material have been attempted by other than an or workmanship for a period of 24 months Authorised Service Agent.