Table of Contents
Advertisement
EN
Specifications
Input Voltage
Lithium
NiCd/NiMH
Voltage Measurement Accuracy
Balancing Cells Accuracy
USB Charging
Smart Battery
XBC100 Menu and Settings
Menu Button: Short Press to enter setting menu, Long Press to enter Smart Battery menu
Up/Down Buttons: Used to navigate the menus and control
Menu Options
Language: Select a language
Backlight: Adjust brightness
System information: Shows firmware version
Alarm Tone: Low Voltage alarm can be set to beep once or once every minute
Low Voltage Alarm: IC3 connection- user can select 5V - 30V as low voltage threshold
Balance port- user can select single cell voltage 2.5V - 3.9V as low voltage threshold
Smart Battery- automatically set
USB Charge: Connect a battery to the IC3
Servo Test (1520µs): Use to test servos with 1520µs center pulse
Servo Test (765µs): Use to test servos with 765µs center pulse
Cells Balance: Use this mode to balance the cells in a lithium battery
5V – 36V
1 – 8S
1 – 10S
+/-0.005V @ 4.2V
< 0.005V
QC3.0, BC1.2, max 12V/2A
Read Charge/ Discharge Setting, Battery Info and Usage History
connector to power USB devices
™
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
