Remove & Install Hydraulic Oil Filter - Marco DUSTMASTER Operator's Manual

28,000 cfm tier 4 diesel dust collectors
Table of Contents

Advertisement

W-562
Always depressurize
the entire system,
disconnect all power
sources and lockout/
tagout all components
before any maintenance
or troubleshooting is
attempted. Failure to
comply with the above
warning could cause
electrical shock and
inadvertent activation of
equipment resulting in
death or serious injury.
W-587
Escaping fluid under
pressure can penetrate
skin and tissue causing
injury. Stop pump and
relieve pressure before
attempting maintenance
or repair. Ensure all
fittings are properly
tightened before
restoring pressure. If
injury should occur,
immediately seek
medical attention.
Failure to comply with
the above warning
could result in death or
serious injury.
W-589
Exposure to diesel
fuel, lubricant grease
and oil, hydraulic oil,
or engine coolant can
cause personal injury.
Do not allow these
products to remain in
contact with the skin
or eyes. Ingestion
of these products or
inhalation of fumes
from these products
can cause dizziness,
nausea, vomiting, or
poisoning. If exposure
to any of these products
occurs, or if any of
these products are
ingested or if fumes
are inhaled, please
consult the product's
SDS for proper first aid
or medical procedures.
Failure to comply with
the above warning
could result in death or
serious injury.
MAINTENANCE
Remove & Install Hydraulic Oil Filter
1) Close two Ball Valve (1).
2) Remove and replace Filter Element (2).
3) Open two Ball Valve (1).
Dustmaster
28,000 CFM Tier 4 Diesel Dust Collectors
®
1
2
26

Advertisement

Table of Contents
loading

Table of Contents