Activating & Deactivating Pneumatic Ball; Vibrators - Marco DUSTMASTER Operator's Manual

W-577
Before using this
equipment, read,
understand and follow
all instructions in the
Operator's Manuals with
this equipment. If the
user and/or assistants
cannot read or
understand the warnings
and instructions, the
employer of the user
and/or assistants must
provide adequate and
necessary training to
ensure proper operation
and compliance with
all safety procedures
pertaining to this
equipment. If Operator's
Manuals have been lost,
visit www.marco.us or
call (563) 324-2519 for
replacements. Failure to
comply with the above
warning could result in
death or serious injury.
17
Dustmaster 28,000 CFM Tier 4 Diesel Dust Collectors
®
OPERATING INSTRUCTIONS
Activating & Deactivating Pneumatic Ball Vibrators
Pneumatic Ball Vibrator Instructions:
Vibrators will help keep dust from building up on the hopper walls and facilitate removal of
material. Run vibrators when running auger system.
1) With airline attached to Inlet (1) to pressurize header, open Ball Valve (3) near pressure
regulator to "activate" vibrators.
2) Adjust vibration intensity by rotating Knob (2). Clockwise reduces vibration intensity.
Counter-clockwise increases vibration intensity.
1
2 3