Charging - OSKA Pulse User Manual

CHARGING OSKA PULSE
To charge your Oska Pulse, plug the charging cable into the USB port on your computer or
an AC charging adapter and plug the micro-USB end into the docking port on the end of
the Oska Pulse device.
During the recharging phase, as soon as the Oska Pulse device connects to a power
source, the LED lights located at the opposite end of the charging port will illuminate.
The LED lights will remain lit until the device is fully charged. It may take up to 3 hours
to reach a full charge. A fully charged battery should provide up to 20 hours of use.
The battery is not user replaceable.
10