Operating Instructions FX-SW07 18Gbps 4x1 HDMI 2.0 Switch 4K@60Hz YUV4:4:4 ARC,CEC,HDR Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
DC 5V 1080P 20m,4K@30Hz 10m,4K@60Hz under HDR can Transmission Distance support 3m Dimension (L×W×H) 178x84.1x28.1mm Note: Specifications are subject to change without notice. Mass and dimensions are approximate. PACKING CONTENTS 1) Main Unit. 1xHDMI switch 2) 1x5V DC Power Supply. www.foxunhd.com...
5) Power supply port CONNECT AND OPERATE 1) Connect source devices to input ports of the switch by HDMI cable. 2) Connect HDMI output port to TV or other HDMI sink devices by HDMI cable. 3) Connet DC 5V power supply www.foxunhd.com...
Page 4
Operating Instructions Application1 Application 2 Attention: 1) Insert/Extract cable gently. 2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable only when power is off. www.foxunhd.com...
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. WARRANTY If your product does not work properly because of a defect in materials or workmanship, our Company www.foxunhd.com...
Page 6
The items listed are not exclusive, but are for illustration only. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. www.foxunhd.com...
Need help?
Do you have a question about the FX-SW07 and is the answer not in the manual?
Questions and answers