ABB NE801 User Manual page 23

Section 3 Installation
Environmental
Temperature, operating
Temperature, storage and transportation
Relative humidity, operating
Relative humidity, storage and
transportation
Altitude, operating
Mechanical
Dimension (W x H x D)
Weight
Mounting
Degree of protection
Configuration
Auto configured (auto-negotiation) or manually setting of speed and duplex of individual TX
port, by DIP-switches. Port mirror function is possible to set with DIP-switch. With the port mirror
function active the switch will copy all outgoing traffic to port 1. This can be used to monitor all
traffic going out from the switch. Packets may be discarded if the total throughput exceeds the
port speed of port 1.
Fibre optic power budget
Model
Transmitted wavelength
Min. output power, transmitter
Max. output power, transmitter
Input sensitivity, receiver
Min. power budget
3BSE080637 C
–25 to +65°C
–25 to +70°C
5 to 95% (non-condensing)
5 to 95% (condensation allowed outside
packaging)
2000 m/70 kPa
35 x 121 x 119 mm
0.2 kg
DIN-rail
IP21
Multimode LC2
1310 nm
–19 dBm
–12 dBm
–31 dBm
12 dBm
23