Power Supply; Network Interface - MicroControl uMIC.200 Quick Start

1

Power supply

Connect DC voltage 9V..36V to the
accordingly marked terminals of the
µMIC.200.
the LED "PWr" shows a permanent
green light. a green flashing light of
"LED1" indicates access to the internal
flash memory.
2

Network interface

Plug network wire into LaN1 or
LaN2 connector and connect it to
your computer.
Follow the instructions for standard
configuration:
IP address LaN 1: 192.168.2.100
IP address LaN 2: is determined
You can log into the µMIC.200
through the SSH protocol.
Login data:
user: umic
Password: umic
via DHCP