SELF-PRIMING PUMPS
FEATURES
30520-4XXX Close Coupled
30520-2XXX Pump Head
Pump Type:
316 Stainless Steel
Neoprene, Nitrile, Viton* or EPDM
Body:
Mechanical, Carbon-on-Ceramic;
Impeller:
or Tungsten Carbide; Nitrile and
Shaft Seal:
Viton
1" NPT Internal
316 Stainless Steel
Ports:
115/230 Vac, Single Phase, 60Hz,
Shaft:
1-1/2 HP, 1740 RPM, TEFC, C-
Motor:
Face, H145TC Frame, Overload
Protected, Capacitor Start.
30520-4XXX 56.0 lb (25,4 kg)
Approx.
Weight:
30520-2XXX 12.0 lb (5,5 kg)
Approx.
VARIATIONS AVAILABLE
MODEL NO.
DESCRIPTION
Standard Pressure, Neoprene
Impeller, Carbon Seal
30520-4001
30520-2001
Standard Pressure, Nitrile
Impeller, Carbon Seal
30520-4003
30520-2003
Standard Pressure, Viton Impeller,
Carbon Seal
30520-4004
30520-2004
Standard Pressure, Neoprene
Impeller, Tungsten Carbide Seal
30520-4101
30520-2101
Standard Pressure, Nitrile
Impeller, Tungsten Carbide Seal
30520-4103
30520-2103
Standard Pressure, Viton
Impeller, Tungsten Carbide Seal
30520-4104
30520-2104
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocity-
mixing, pumping machine tool coolants, spill return,
sump drainage, chemicals, phar ma ceu ti cals, soap,
liquors, ink, dyes, alcohol, dilute acids, tanning liquors,
glycerine, brine, etc.
*Viton is a trademark of E.I. Du Pont de Nemours and Company.
MODELS 30520-4XXXX
PHARMACEUTICAL:
and preparations. Filtering pharmaceutical solutions.
Filling line supply pump.
PAPER PROCESSING: Transferring and applying
starches, sizes, etc. Circulating and processing wood
pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar,
syrups during processing, liquids containing solids in
suspension such as chopped tomatoes, nuts, etc.
Removal of distillery wort and brewery slop. Processing
viscous materials such as peanut butter, may on naise,
ketchup, honey, etc. (low speed). Pumping whisky, wine,
rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbi-
cides and pesticides.
OPERATING INSTRUCTIONS
1. INSTALLATION – Pump may be installed in any
position. The rotation of the pump shaft determines
the location of the pump's intake and discharge
ports. (Refer to dimensional drawing). Pump is nor-
mally assembled at factory for clockwise rotation
(looking at end cover). If counter clockwise rotation is
desired, follow steps 1 and 2 of disassembly and step
7 of assembly instructions to change direction of
impeller blade deflection under cam.
2. MOTOR SELECTION – Pump head is designed to fit
a H145TC Frame NEMA C-face motor. Motor should
be rated 1-1/2 horsepower at 1750 RPM with a service
30520-2XXXX
Processing medicines, lotions