Getting Started - Siemens HHB-750 User Manual

of Bluetooth Stereo Headset HHB-750en A31nnn-Xnnnn-Xn-n-nnnn
right page (3)
®
Bluetooth technology
®
The Bluetooth brand and corresponding
logos are the property of Bluetooth SIG, Inc.
(Special Interest Group). Siemens is li-
censed to use these brands. Any other
brands or trade names are protected brand
names or registered trademarks of the re-
spective owners.
The Headset and mobile phone
communicate using Bluetooth, a
short-range radio connection.
To enable this communication,
the Headset must be connected
(Pairing) to the phone. For more
information please read "Con-
necting to the phone for the first
time (Pairing)", page 3.
Symbols
The following symbols explain
the operation of the Headset:
b
This function varies from
service provider to service
provider. You may need to
register separately for this
service.
Headset Bluetooth ® Stereo (en)

Getting started

Insert the battery, see picture.
Connecting to the phone for
the first time (Pairing)
For details on how to set up a Blue-
tooth connection, please consult your
phone's user guide.
• Switch the Headset on.
• Press the ON
longer than 1 second (con-
nection to a second phone:
longer than 5 seconds). The
display shows the registration
mode (pairing).
• Activate your phone's Blue-
tooth interface and start
searching for Bluetooth-
activated devices within the
range of your mobile phone.
• If your mobile phone finds
your Headset, this is shown on
the mobile phone display
beneath the device name
HHB-750.
3
key and hold