Zanussi ZIT64X User Manual page 7

Stops after
The heat setting
Touch to increase the heat setting. Touch
crease the heat setting. The display shows the heat set-
ting. Touch and at the same time to switch off the
cooking zone.
Automatic Heat Up
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This function
sets the highest heat setting for some time (see the graph-
ic), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function:
1. Touch
. comes on in the display.
2. Touch
again and again until
display.
3. Immediately touch
essary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function touch
Switching the Power function on and off
The Power function makes more power available to the in-
duction cooking zones. The Power function is activated for
10 minutes at most. After that the induction cooking zone
automatically switches back to the highest heat setting. To
switch on, touch ,
or .
6 hours
to de-
4 5 6 7 8
comes on in the
again and again until the nec-
.
comes on. To switch off, touch
5 hours
Power management
The power management di-
vides the power between two
cooking zones in a pair (see
the figure). The power func-
tion increases the power to
the maximum level for one
cooking zone in the pair and
automatically decreases in
the second cooking zone to
a lower power level. The display for the reduced zone al-
ternates.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the tim-
er.
• Selection of the cooking zone:touch
again until the indicator of a necessary cooking zone
comes on.
9
• Starting or changing the timer: touch
timer to set the time (
indicator of the cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking zone with
and touch
time counts backwards to
cooking zone goes out.
• Checking the remaining time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the remaining time.
When the time elapses, the sound operates and
flashes. The cooking zone switches off.
• Stopping the sound: touch
You can use the timer as a minute minder while cooking
zones do not operate. Touch
timer to select the time. When the time elapses, the sound
00
operates and
4 hours 1.5 hours
00 99
- minutes). When the
to switch off the timer. The remaining
00
. The indicator of the
. Touch
flashes.
again and
or of the
00
or of the
7