Pairing Method; The Installation Of The Rollcage - XciteRC High-Speed Racebuggy 2WD User Manual

Getting started

Pairing method

What is pairing? It means that the using frequency can be determined
automatically when player connects vehicle to the transmitter.
• Pick up the vehicle as picture to make the wheels rotate freely before
turning on the vehicle's power.
• Turn on the power switch of vehicle and the red LED light flashes in the
following order:
flash 3 times extinguish flash 3 times extinguish
Vehicle bottom
Power
switch
• Turn on the power switch of transmitter. The red LED light will flash,
• Keep the transmitter next to the car (about 50 cm). The red LED light flashes in the following order:
Flash 3 times on Flash 3 times on
At this moment, the transmitter pairs automatically and the light keeps on.
When the lamps (both vehicle and transmitter) completely light in 2 seconds, it means
that the frequency pairing finishes. If not, please repeat this step.
Some cars drive at the same time: If other players used this product, the frequen-
cies are possibly same. At this moment, you can keep other controllers next to yours
(within 5m) and pair them to avoid the same frequencies.

The installation of the Rollcage

Rollcage´s installation can make the tilted vehicle restore easily. Certainly the vehicle can move without a
Rollcage.
Rollcage´s making
Front
Please pay attention to the direction
30801000/2000/3000 - High-Speed Racebuggy 2WD
Red LED
light
Vehicle surface
Back
Double-sided
adhesive tape
Furl and fix it with the double-sided adhesive tape.
Double-sided
adhesive tape
Please wipe the surface
before sticking on the
adhesive tape.
EN
19