Table of Contents
Advertisement
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULL Y SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY .
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to
use.
.
2
Avoid placing the unit near heat sources,
direct sunlight or moisture.
Air must circulate properly around your
3.
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if the floor is
carpeted.
4.To avoid vibrations, the unit must be level.
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the
rear to aid in door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise
raise the unit, counterclockwise
lower it (If stand base is not used).
5. Don't install this appliance below 5
cause the debasement of the refrigerator.
When use stand base put refrigerator on
6.
smooth/flat floor.
It is requiring smooth/flat floor to get good
product standing.
NEXT
1. Clean your refrigerator thoroughly and wipe
off all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc.,
in their proper places. They are packed
together to prevent possible damage during
shipment.
Connect the power supply cord (or plug) to
3.
the outlet. Don't double up with other
appliances on the same outlet.
Prior to storing food, leave your refrigerator
4.
on for 2 or 3 hours.
to
(
)
to
(
)
It may
°C.
9
Advertisement
Table of Contents
