Before You Start; Installing And Replacing The Batteries; Setting Date, Time And Measurement Unit - Care Touch Platinum Blood Pressure Monitor User Manual

BEFORE YOU START

Installing and Replacing the Batteries

• .Open the battery cover.
• .Install the batteries by matching the correct polarity, as
shown below. Always use the correct battery type (2×AAA batteries).
• .Replace the cover.
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
CAUTION
Remove batteries if the device is not likely to be used for some time.
The old batteries are harmful to the environment, do not dispose with other daily trash.
Remove the old batteries from the device and follow your local recycling guidelines.
Do not dispose of batteries in fire. Batteries may explode or leak.
6

Setting Date, Time and Measurement Unit

It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that is
stored in the memory. (year :2010—2050,time format:24 H/12 H)
1.
When the monitor is off,
press "SET"button,it will
display the time.Then
hold pressing "SET" for
3 seconds to enter the
mode for year setting.
2.Press the "MEM" to
change the [YEAR].
3.When you get the
right year, press
"SET" to set down
and turn to next step.
BEFORE YOU START
7