Table of Contents
Advertisement
What to expect:
The blue POWER light will be on if the BASE UNIT is connected to
power.
If the POWER light is on and the BASE UNIT is connected to a working phone line,
go on to step 3.
Step 3 – Make sure the PENDENT and the BASE UNIT are talking to each other.
Background information: The PENDENT and the BASE UNIT are connected by a
wireless radio link. They must be synchronized to work together. They should have
already been synchronized at the factory, but resetting this s simple.
What to do:
Press the "SETUP" button on the BASE UNIT. The red "SCANNING"
light will come on.
Press and hold the PANIC BUTTON and the BATTERY TEST buttons
together.
What to expect:
The red light will go out on the BASE UNIT. This indicates the
PENDANT and the BASE UNIT are synchronized. At this point,
everything should be working fine.
If your 30911 is still not working, call our TECH SUPPORT department at the number
on the bottom of this page.
9
Advertisement
Table of Contents
