inout RePlay 01 User Manual page 31

IMPORTANT!
When this mode is enabled, the correct management of the standard communication
protocol is no longer guaranteed, since the two managements are asynchronous and
share the same serial.
ID3 TAG COMMAND EXAMPLES
#0060test
Loading command via RS232 playlist
'test.m3u'
#00603
Loading command via RS232 playlist
'3.m3u'
IMPORTANT!
In the command package to be delivered to Replay, you must put the name of the file
relevant to the desired playlist, which must comply with the following rules:
• It must not include the extension, Replay automatically queues the extension ".m3u";
• The field 'file name' must be eight characters long. If the name of the playlist file has
less than eight characters, one must introduce 'space' characters before and after the
file name, so as to obtain a file of the required length;
• the name of the file must not be longer than eight characters;
This function is managed only under the following conditions:
• Replay must work in playlist mode;
• the flash memory must not contain any file with a schedule palimpsest;
• it must be set with a playlist management mode calling for its manual selection. See
configuration parameter MPLL (Mode PLay List) which must be set at 5 or at 6.
Replay User Manual v.
COMMAND DESCRIPTION
ENQ 0060nnnnnnnn
ENQ = '#' for RS232
=
00 = addressee address for RS232.
60 = code playlist loading command
nnnnnnn = name of playlist file .
Page 30
1.2