Operation With Logical Inputs; Introduction To The Logical Input Operation Mode; Input Management Parameters (Config.txt) - inout RePlay 01 User Manual

7

Operation with logical inputs

7.1 Introduction to the logical input operation mode

Replay can also reproduces individual (message) audio files with direct selection from six
opto-isolated inputs (par. 3.4). Replay enters this working mode if there are no palimpsest
files or playlists present.
Activation is carried out directly or in binary combination, up to a maximum of 63 files,
using the inputs IN 1, IN 2, IN 3, IN 4, IN 5, IN 6. For the manner of connection, see the
paragraph 3.4.
IMPORTANT:

7.2 Input management parameters (CONFIG.TXT)

Example:
TPCM=10
MICP=1
MIRS=0
TPCM (Time of persistence of input command)
Setting the time of persistence of input command (waiting time before Replay
interprets the input command).expressed in tenths of one millisecond (value
between 0 and 255 in decimal):
TPCM
0=no delay
1=10mSec
2=20mSec
100= 1 Second.
MICP (Continuous Play input mode)
0=once the reproduction of the coded file – requested by the input code - is
over, stand-by will be activated.
MICP
1=the requested coded file is continuously reproduced as long as the relevant
code stays in input.
Replay User Manual v.
Connect +12V output to Vlink input.
1.2
Page 25