Digital lighting management
digital ir handheld remote (4 pages)
Summary of Contents for wattstopper Legrand Miro Key Fob
Page 1
IF YOU HAVE ANY QUESTIONS REGARDING SPECIFICATIONS OR REQUIRE ADDITIONAL FILE FORMATTING, PLEASE CONTACT Mary Jo Sowinski. Phone: 408-486-7511 Email: maryjo.sowinski@wattstopper.com All information in this drawing is the property of Watt Stopper/Legrand and cannot be copied or used without the written approval of Watt Stopper/Legrand.
Page 2
TITLE BOX PAGE ONLY. DO NOT MAKE FILM • DO NOT PRINT...
Stopper/Legrand wireless network devices are available at • Button 2 turns off all, or selected lights in the room www.wattstopper.com/Miro. • Button 3 turns off all, or selected house lights These three applications are typical, however the user can record scenes in any number of ways.
Page 4
(approximately 2 seconds). End the binding from the MKFOB: Simultaneously press and hold button 1 and 2 until the LED stops flashing yellow and turns green (approximately 2 seconds). Key-chain loop www.wattstopper.com Call 800-879-8585 for Technical Support...
Operating Mode-3 OPERATION In Mode-3, the MKFOB is bound to an individual room to allow the When a MKFOB is added to a system its scene buttons execute device to record and recall both Room and House scenes. This is the same scenes as other house or room level scene controllers done so that multiple key fobs can be used in the wireless system to which it is bound.
Please on the soft rubber membrane. Recycle 2800 De La Cruz Boulevard, Santa Clara, CA 95050 Technical Support: 800.879.8585 www.wattstopper.com 07071r1 6/2007...